GUANGDONG HONGBO BUILDING MATERIALS SCIENCE AND TECHNOLOGY CO., LTD

English
Professional PVC roof tile , Polycarbonate sheet and FRP roof tile Manufacturer!
Tel:+8613929942120
Redwave  >  AI - Page Sitemap  >  affordable polycarbonate panels raindrop from China for ocean hall
affordable polycarbonate panels raindrop from China for ocean hall

Affordable polycarbonate panels raindrop from China for ocean hall

Business Term
FOB , CFR , CIF
Lead Time
7--15 days
Model
Hollow , solid , embossed, corrugated
Minimum order quantity
2000SQM
Payment
T/T
Origin
China
Brand
Redwave , Ketelong ; OEM available
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

Product Introduction:

Redwave polycarbonate hollow sheet is made from virgin polycarbonate material and the high concentration UV coextrusion. The sheet possesses the features of light in weight, pervious to light, impact resistance, heat isolation, flame retardant, endurance, etc.

In addition to the above features, Crystal PC hollow sheet is with the effect of “glittering and translucent” making the light penetration downier with better aesthetic visual effect.

 

Best feature of the product:UV co-extrusion process for resistance of yellowing, sound insulation, heat preservation, safe and transparent.

 

Scope of Application:

Skylight roof commercial building, residential building,factory building, warehouse, indoor stadium, advertising board, motor shed, partitions for swimming pool,

greenhouse and indoor chamber, decoration and exhibition.

 

Product Specification:

Standard width: 2100mm 、1220mm ( available for thickness 4mm to 8mm only )

Standard thickness: 4.0mm、6.0mm、8.0mm、10.0mm、12.0mm、14.0mm、16.0mm ( 4 ~ 10 mm is the rectangular structure with twin wall,

12 ~ 16 mm is the rectangular structure with triple wall)

Standard lengt: 5800mm ; 11800mm

Color: transparent, grass green, opal ,blue, bronze

affordable polycarbonate panels raindrop from China for ocean hall-1

Installation guide:

 

1.1  Installation by inserting

A.Because the protective film inserted in supporting frame has a bad affect on adhesion between crack filler and PC panels, protective film 5-10mm wide inserted should be cut off before PC products are inserted.

B.Because the PC panels don't change in the same range when expand with heat and shrink with cold as metal frame, and they can be bent to some extent and resit air pressure, You must take the following factors into consideration: suitable quantity inserted, the space allowing their expanding or shrinking with the change of temperature and right thickness of PC panels.


1.2Installation by screws:

A.For any outdoor installation or installation in environment with temperature difference of 8℃,enlarge the aperture of any bolt or rivet much be enlarged to allow PC panels expanding or shrinking with change of temperature. Generally, the aperture shall be 50% bigger than the diameter of bolt. Use aluminum rivet. Self-drilling screw must be abandoned.

B.Use silica gel to fill all apertures and cover their exposing parts to prevent PC panels from map cracking by cleanser which may inserted in apertures.

C.The head of rivet should be 1.5-2.0 times bigger that the stem. Use gasket to fill between PC panels and rivet head to prevent PC panels getting directs pressure from rivet head, then lessen their pressure in this way.

D.Don't tighten screw too much in case stress may cause thereof.

E.Don't use PVC gasket and water-proof adhesive tape with asphalt content .

F.Fix the metal pressing strip on long and short edges of PC panels. Remain a space for their expanding. Strengthen installation stability

affordable polycarbonate panels raindrop from China for ocean hall-2

Limitation to know :

Keep PC panels away from wet cement surface or any acid or base materials.

Keep PC panels away from any organic solvent or any glue or paint composing of organic solvent.

Keep frame clean and jointing groove flat and smooth .

Choose right thickness of PC panels,allow flexure radius .

Remain space for expanding , pay attention to inserting depth. Don’t know drill any hole in curved part of sheet.

Use only neutral silica gel and use only EPDM rubber strip or washer as sealant.

Use electrical tools (tungsten carbide saw )to cut; During cutting, stabilize

PC panels to prevent their vibration and never pill off protective film .

In case that marks have to be made before cutting,try to mark on protective

film;If the marks must be made directly on PC panels,use wax crayon instead

of any sharp tool to mark .

Never pill off protective films until installation is completed .



Redwave polycarbonate panels is manufactured by our adroit worker by using the sophisticated equipment and advanced techniques. The product is easy to install and use
Redwave polycarbonate panels is manufactured from optimum quality raw materials that render superior durability. The product will really improve the performance of the door
Redwave polycarbonate panels is fabricated under the direction of proficient professionals. The galvanized or zinc plated surface enhances its corrosion resistance
Redwave polycarb sheeting is elaborately designed by innovative experts who know well about the market changing demands. The product can be recycled and reused for environmental friendliness
The production of Redwave polycarbonate panels adopts the high standard of workmanship. The product has a smooth metal surface with no burrs
polycarbonate panels have features like polycarb sheeting, accord with polycarb sheeting idea, and contributes to the polycarb sheeting field. Its size and shape can be customized according to different doors
Product Message
Contact