How to replace resin tiles in old houses in rural areas?

The old tile-roofed houses in the countryside now have their own history of many years, and there are more and more research on the existing problems. The tiles will fall off and water will leak if there is a little wind and rain. The perennial development needs to renovate the roof. ! Today, when we are constantly learning and progressing in the era, Dawei tiles are obviously very backward. Resin tiles are representative works of tiles in the new era. It is imperative to replace resin tiles in old rural houses. How to replace them? Here are a few important steps:

1. Clean up the old tiles on the roof of the old house, clean it up, and check whether the wooden structure can still be used. If there are decayed purlins, they need to be replaced;

2. The purlin spacing design of resin tiles requires enterprises to keep within 66 cm. If our original purlin spacing is too wide, we need to add purlins. If the original purlin spacing is appropriate, and they have no signs of corrosion, we can directly Lay resin tiles on it;

3. Deal with the slope angle of the roof, such as inclined grooves, flooding, etc., and fix the accessories used in these places;

4. Install the resin tile. After the main tile is installed, install accessories such as the right ridge tile, and use a special waterproof fixture for resin tiles. Key reminder: Do a good job of tile safety measures for old houses. After all, it is an old house, so pay attention to safe construction. Resin tile is very light in weight and will not increase the weight of the original house structure, so it is very suitable for the renovation of old houses.