What should I pay attention to when installing fixed resin plastic tiles?

In recent years, resin plastic tiles have been widely used, and the shadow of resin plastic tiles can be seen in residences, villas, factories, markets, resorts and other places. Standard fixed installation of resin plastic floor tiles to ensure the service life of the tiles and improve safety. So what do you need to pay attention to when fixing resin plastic tiles?

1. The First drill with an electric drill, the diameter of the hole should be 2 mm larger than the diameter of the screw, and the tightness of the screw cap should be moderate and not too tight.

2. When we are installing and fixing, the resin tile manufacturer recommends using professional related self-tapping screws for a fixation, which can ensure that the fixing piece is perpendicular to the tile surface. Tighten, so as not to cause the deformation of the tile due to thermal expansion and contraction.

3. There are no less than 4 fixings per square meter, and waterproof caps are installed on the fixings to prevent the screws from rusting and roof leakage. For tiles laid on the perimeter of the roof, please add fasteners and ensure that the part protruding from the eaves is within 100mm. On the longitudinal edges of the tiles, each crest should be fixed to the purlins with fittings, and additional reinforcement measures should be taken in windy areas.

When installing plastic tiles, we must use professional installation tools. Improper installation will affect the use effect of the installation, and future use may also be affected. The fixing method is very important to ensure the quality of the resin plastic tile, so it must be strictly controlled during the construction process, and every detail must be taken seriously to ensure the construction quality.