Guangdong Hongbo Building Materials Science and Technology Co., Ltd
Resin tile manufacturers tell you that installation is the last process of synthetic resin tiles. Only after installation can the three-dimensional effect of the whole house be perfectly presented. However, when installing resin tiles, there will also be cases where the wrong holes are accidentally drilled. Well, there are three specific remedial situations.
If the screw is not installed on the purlin due to an inaccurate layout, the screw is not installed on the purlin, just fill the wrong hole with glass glue. After filling, reinstall it in the correct position, and the lower cover of the waterproof cap can cover the glass glue.
When the screw is installed, the deviation is large. When the screw is installed, the deviation is large, and the lower cover of the waterproof cap cannot cover the wrongly punched hole. You can replace the screw with a nut to fix the waterproof cap on the synthetic resin tile.
The last type of resin tile installation error is the most troublesome and annoying. If the synthetic resin tile is installed incorrectly in a large area, the resin tile can only be re-purchased. A warm reminder: Before installing synthetic resin tiles, you must first clearly understand the installation method before proceeding with construction.
The second kind of wrongly drilled screws is a small problem, which can still be remedied; if a large-scale installation error is made, you can only re-purchase synthetic resin tiles. So, be sure to understand the installation method clearly!